FEATURES
- Proven lantern design with the flexibility to use the same housing and lens system for both LED and lamp changer systems, and ability to retrofit LEDs into existing installations
- A three‐piece lens mounting system engineered to eliminate lantern failures from cracked or broken components at the lantern hinge point
- Silicone rubber gasket for air‐tight seal
- Fittings in base for electrical connection
- Fitted with the AM‐6 Flasher with 3×4 STABRITE LED array in blue/yellow configuration
- Extremely high flux, compact blue/yellow LEDs mounted on a heavy‐duty heat sink
- Secondary environmental enclosure independent of the lantern housing to assure that moisture does not reduce the life of the LED
- Heavy‐duty heat sink maximizes the life of the LED array by keeping the maximum temperature of the array to less than 50°C
- LED array/diffuser system approximates a marine signal lamp located at the focal point of the lens to maximize the output of the lantern in the horizontal plane with a horizontal uniformity of ±15% and wide vertical divergence
- Large space in base of lantern available to house remote monitoring radios, Uniflash®‐III GPS synchronizing system, ATONIS (AIS Monitoring), etc.
- Character: BI 1.0 + 0.5S + YI 1.0 + 0.5 = 3.0 sec
